YOUR BEST CHOICE FOR EFFICIENT CONSTRUCTION LOGISTICS

FOR GENERAL SPECIFICATION CLICK HERE.

The Alimak Scando 650 Passenger/Goods Hoists can be used in single or dual configuration. The hoist cage design is truly modular and offers several optional cage lengths between 3.2m – 3.9m and 3.9m – 5m. depending upon the required capacity, the cage will be fitted with the two or three VFC frequency controlled motors or two direct online motors which drive the system through high efficiency gearboxes

The Scando 650 operates at higher speeds starting from 42m/min, quicker than previous Alimak Passenger Goods Construction Hoists and provides more hoist power, while using as much as 40% less power than the previous Scando models. A modern control system with keypad in the cage and call buttons at the landings makes the hoist easy to operate and with the modern technology the Scando 650 range brings, the hoist will stop at the same point at each desired landing each time. A multiple choice of cage configurations and different size landing doors are available.

  • Payload up to 2500kgs
  • Speed up to 27m/min
  • Max lift height 100m (increased lift height on request)
  • Car width 1.4m
  • Car length 2m – 6.2m
  • Motor Control DOL
  • No of Motors 1 – 2
  • Power Supply Range 400v, 3 phases, 63amp

Download a PDF

HOIST_014
HOIST_014
  • Payload up to 2500kgs
  • Speed up to 27m/min
  • Max lift height 100m (increased lift height on request)
  • Car width 1.4m
  • Car length 2m – 6.2m
  • Motor Control DOL
  • No of Motors 1 – 2
  • Power Supply Range 400v, 3 phases, 63amp

Download a PDF